Thank you for visiting!
Our website is being updated.

APC Smart-UPS RT 10000VA 230V

Output Power Capacity 8000 Watts / 10 kVA

Max Configurable Power 8000 Watts / 10 kVA

Nominal Output Voltage 208V

Output Voltage Note Configurable for 208 or 240 nominal

output voltage Efficiency at Full Load 92%

Output Voltage Distortion Less than 3%

Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1

Crest Factor 3 : 1

Waveform Type Sine wave

Output Connections (1) Hard Wire 3-wire (2PH + G)

(2) NEMA L6-20R (2) NEMA L6-30R

Bypass Internal Bypass (Automatic and Manual)

Input

Nominal Input Voltage 208V

Input Frequency 50/60 Hz +/- 5 Hz (auto sensing)

Input Connections Hard Wire 3-wire (2PH + G)

Input voltage range for main operations 160 – 280V

Other Input Voltages 240

Batteries & Runtime

Typical recharge time 2.20 hour(s)

Replacement Battery RBC44 RBC™

Quantity 2

Typical Backup Time at Half Load 14.9 minutes (4000 Watts)

Typical Backup Time at Full Load 4.8 minutes (8000 Watts)

 

Physical Maximum Height 432.00 mm

Maximum Width 263.00 mm

Maximum Depth 736.00 mm

Rack Height 6U

Net Weight 110.91 KG

Shipping Weight 129.09 KG

Detail Information : http://www.apc.com/resource/include/techspec_index.cfm?base_sku=SUrt10000xli

Detail For Runtime : http://www.apc.com/products/runtime_for_extendedruntime.cfm?upsfamily=163раскруткаdubai best escortsмама плюс люблино

Overview


Features


 

Availability
Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime Allows additional run time to be quickly added as needed.
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Manageability
Network manageable Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.
SmartSlot Customize UPS capabilities with management cards
LED status indicators Quickly understand unit and power status with visual indicators
Serial connectivity Provides management of the UPS via a serial port.
Adaptability
Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.
Serviceability
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification Warns when a battery is not available to provide backup power.
Audible alarms Provides notification of changing utility power and UPS power conditions
Protection
Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.

Benefits


Default backup time

5 mins

Customer Support: (08) 38.420.458

Head Office

9/35 Pham Van Hai, Ward 1,
Tan Binh District, Ho Chi Minh City, Vietnam.
Tel: (+84)8.38.420.458 - Fax: (+84)8.38.420.459
Hotline: 0938.805.380 (Mr.Tuấn)

Representative Office

B45, Lot 6, Dinh Cong Urban Area, Dinh Cong Ward,
Hoang Mai District, Ha Noi, Vietnam.
Tel: (+84)4.35.668.011 - Fax: (+84)4.35.668.030