Thank you for visiting!
Our website is being updated.

APC Smart-UPS 5000VA 230V Rackmount/Tower

APC Smart-UPS 5000VA 230V Rackmount/Tower

Includes: CD with software, Documentation CD, Installation guide, Rack mounting hardware, Rack Mounting support rails, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card

 

 

 

Output
Output Power Capacity 4000 Watts / 5000 VA
Max Configurable Power 4000 Watts / 5000 VA
Nominal Output Voltage 230V
Output Voltage Distortion Less than 5%
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load 96.0%
Output Frequency (sync to mains) 47 – 53 Hz for 50 Hz nominal
Other Output Voltages 220, 240
Crest Factor Unlimited
Topology Line Interactive
Waveform Type Sine wave
Output Connections
(8) IEC 320 C13(2) IEC 320 C19(4) IEC Jumpers
Input
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections Hard Wire 3-wire
Input voltage range for main operations 340 – 460 (400V), 408 – 538V
Other Input Voltages 160 – 286V
Input voltage adjustable range for mains operation 151 – 302V
Batteries & Runtime
Battery Type VRLA
Typical recharge time 3 hour(s)
Replacement Battery RBC55
Communications & Management
Interface Port(s) DB-9 RS-232, SmartSlot
Available SmartSlot™ Interface Quantity 2
Pre-Installed SmartSlot™ Cards AP9630
Audible Alarm Audible and visible alarms : configurable delays

продвижениеyoung asian escort dubaiрадиатор отопления для ванной комнаты

Overview


5000

Features


 

Resettable circuit breakers Enables a quick recovery from overload events.
Boost and Trim Automatic Voltage Regulation (AVR) Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Serial connectivity Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Disconnected battery notification Warns when a battery is not available to provide backup power.
Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Audible alarms Provides notification of changing utility power and UPS power conditions
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Cold-start capable Provides temporary battery power when the utility power is out.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Network manageable Provides remote power management of the UPS over the network.
Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Serial connectivity Provides management of the UPS via a serial port.
SmartSlot Customize UPS capabilities with management cards.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Benefits


 

 

Availability
Boost and Trim Automatic Voltage Regulation (AVR Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging
Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging chargingProlongs battery life by regulating the charge voltage according to battery temperature.

 

Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification Warns when a battery is not available to provide backup power.
Manageability
Network manageable Provides remote power management of the UPS over the network.
Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition
LED status indicators Quickly understand unit and power status with visual indicators
Serial connectivity Provides management of the UPS via a serial port.
USB connectivity Provides management of the UPS via a USB port (not available on all models)
Disconnected battery notification Warns when a battery is not available to provide backup power.
Serviceability
User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. 
Resettable circuit breakers Enables a quick recovery from overload events. 
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Adaptability
Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications
Safety
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

 

Default backup time


Customer Support: (08) 38.420.458

Head Office

9/35 Pham Van Hai, Ward 1,
Tan Binh District, Ho Chi Minh City, Vietnam.
Tel: (+84)8.38.420.458 - Fax: (+84)8.38.420.459
Hotline: 0938.805.380 (Mr.Tuấn)

Representative Office

B45, Lot 6, Dinh Cong Urban Area, Dinh Cong Ward,
Hoang Mai District, Ha Noi, Vietnam.
Tel: (+84)4.35.668.011 - Fax: (+84)4.35.668.030