Thank you for visiting!
Our website is being updated.

Symmetra PX 100kW Scalable to 100kW N+1, 208V

 

 

Symmetra PX 100kW Scalable to 100kW N+1, 208V

Includes: Installation guide, Network Management Card, Start-Up Service, User Manual

 

 

Output
Output Power Capacity 100 kW / 100 kVA
Max Configurable Power 100 kW / 100 kVA
Nominal Output Voltage 120V, 208V, 208V 3PH
Output Voltage Distortion Less than 2%
Output Frequency (sync to mains) 57 – 63 Hz for 60 Hz nominal
Crest Factor Unlimited
Topology Double Conversion Online
Waveform Type Sine wave
Output Connections (1) Hard Wire 5-wire (3PH + N + G)
Output Voltage Tolerance +/-1% static and +/- 5% at 100% load step
Output Voltage THD < 2% for 0 to 100% linear load and < 6% for full non linear load
Bypass Built-in Static Bypass
Input
Nominal Input Voltage 208V 3PH
Input Frequency 40 – 70 Hz
Input Connections Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations 177 – 239 (208V)V
Maximum Input Current 332V
Input Total Harmonic Distortion Less than 5% for full load
Batteries & Runtime
Battery Type VRLA
Battery Design Life 5 – 8 Year(s)
Battery Service Life 3 – 5 Year(s)
Nominal Battery Voltage +/-192 V (split battery referenced to neutral)
End of Discharge Battery Voltage +/-154 V
Maximum Available Short Circuit Current 30 kA
Efficiency in Battery Operation 94.70%
Typical recharge time 2 hour(s)
Extended Run Options APC Symmetra PX 100kW Scalable to 100kW, 208V with Startup
End of Discharge Maximum Battery Current 351
Communications & Management
Interface Port(s) DB-9 RS-232, SmartSlot
Available SmartSlot™ Interface Quantity 2
Pre-Installed SmartSlot™ Cards AP9517MPHW03
Control panel Multi-function LCD status and control console
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays

сайтtop escort websiteконвекторы в пол

Overview


40

Features


Swappable batteries Allows quick addition of runtime capacity or replacement of existing battery modules. Installed modules are automatically recognized by the system.
Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR)
Battery modules connected in parallel Delivers higher availability through redundant batteries.
Manageable external batteries Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

Benefits


Availability
Configurable for N+1 internal redundancy Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Redundant Intelligence Modules Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions..
Power Modules connected in parallel Enhances availability by allowing immediate, seamless recovery from isolated module failures.
Swappable power modules Allows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.
Modular design Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Network manageable

 

Provides remote power management of the UPS over the network.
Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Manageability
Integrates with StruxureWare Data Center Expert An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Audible alarms Provides notification of changing utility power and UPS power conditions
LED status indicators Quickly understand unit and power status with visual indicators
Agility
Scalable power capacity Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
Programmable frequency Ensures compatibility with different input frequencies.
SmartSlot Customize UPS capabilities with management cards.
Total Cost of Ownership
Fully-rated power kVA equals kW Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used..
5x8 Start-up service included Required for full coverage of factory warranty

 

Default backup time


Customer Support: (08) 38.420.458

Head Office

9/35 Pham Van Hai, Ward 1,
Tan Binh District, Ho Chi Minh City, Vietnam.
Tel: (+84)8.38.420.458 - Fax: (+84)8.38.420.459
Hotline: 0938.805.380 (Mr.Tuấn)

Representative Office

B45, Lot 6, Dinh Cong Urban Area, Dinh Cong Ward,
Hoang Mai District, Ha Noi, Vietnam.
Tel: (+84)4.35.668.011 - Fax: (+84)4.35.668.030